Introduction of electromagnetic brakes for servo motors

CDC-S series electromagnetic brake series for our company carefully designed and developed small and medium-sized electromagnetic spring pressurized power loss brake, professional for servo motor, this series of products have fast braking time, low running noise, stable operation, good control performance, the whole machine has the advantages of high cost performance. Products are widely used in military industry (missiles, submarines, outer space, etc.), ATM machines, inkjet printers, engravers, spraying equipment, medical instruments and equipment, computer peripherals and mass storage equipment, precision instruments, industrial control systems, automation, robots, computer embroidery machines, textile machines and other aspects of work product control fields.

  Key features

  ●For holding brakes

  ●Can withstand a certain number of emergency brakings

  ●Large torque with small size

  ●Torque range 0.32-44 (N.m).

  ● Long service life

  ●Using imported high wear-resistant friction plate, durable

  performance parameters

  Size and diagram

  Precautions for use

  1. The brake uses more soft materials, and should avoid knocking, falling or too hard during the installation process, otherwise it may cause the brake to appear scratches or deformation and affect the use, please pay attention during the installation process.

  2. Please be careful not to stretch the lead wire of the brake forcefully, bend it too much or lift the lead wire by hand, which may damage the lead wire and cause the brake to not work.

  3. Our brakes are all dry double-sided friction pad brakes. If the friction surface is stained with oil or water, the torque of the brake will drop, so it needs to be used in a dry state. To prevent oil or water and dust, use a protective cover.

  4. Excessive voltage fluctuations will affect the performance of the brake, so the use voltage of the brake is controlled within the range of ±10% of the rated voltage, and it is required to be smooth and interference-free.

  5. The working clearance of the brake has been adjusted when leaving the factory, and there is no need to adjust it when using it, and the user is requested not to open the brake privately. Improper clearance may cause the brakes to malfunction.

  6. Special attention: the brake must be opened when the motor rotates, and it is not possible to forcibly drag with the brake! Dragging with the brake will damage the brakes in a short time!

  7. The fixing of the shaft sleeve (square wheel or spline sleeve) can be fixed by screws or keys, or it can be fixed by interference fit, and the interference fit method is only suitable for built-in brakes.

  8. The installation screws are required to be fixed with thread special glue, when applying glue to the screws, please be careful not to apply to the rotor surface and the surface of the square wheel.

  9. The shaft sleeve connected between the brake and the shaft must ensure a certain distance from the armature of the brake "X" and the armature of the brake during installation, and the value of "X" is recommended to be 0.2 ~ 0.5mm; Please refer to the product drawings of each specification for detailed dimensions.