Products

CDC-CB series

Category: 待上架

Summary Description

Spring-applied brakes for small and ultra-thin motors Torque Range: 0.06Nm--3.2Nm

E-mail:raymond.deng@cdcjd.com

WhatsApp:+86-139 8076 1815

Product Description

CDC-CB Brake is a type of Spring-applied Electromagnetic Brake, which is specially designed for middle andsmallsuper-thin motors. it can achieve higher power start and lower power maintenance of the brake, bycombination with special controller. it has big advantages of super thin, energy efficient, lower heated, higheltorgue, long life time etc. This kind of brake is widely used in servo motors assembly to robot, manipulator whohave high require ments of compact space and smaller volumes.

 

Characteristics

● Holding Braking

Afford certain times of braking on the occurrence ofemergency;

● Small size, super-thin.

0.06-3.2(N.m)/Torque range 0.06-3.2(N.m)

● Long life time

Durable by using imported highly-wearable friction plate;

● Smalle rbacklash

Spline-hub structure, backlash 0.2°~0.5°

 

Dimension and Diagram

Dimension of Brakes

Model Base No. Φ A Φ B Φ C Φ D S Φ V H K a G L F R P
CDC-S017CB 17 26 22 7 12 4.3 3-Φ 2.3 9.5~10 14 0.1 8 4以上 8 1 30
CDC-S020CB 20 32 28 9 16 5 3-Φ 2.3 9.5~10 14 0.1 12 4以上 12 1.5 30
CDC-S025CB 25 39 33 9 18 5.5 3-Φ 2.8 9.5~10 14 0.1 12 4以上 12 1.5 30
CDC-S032CB 32 48 42 15 28 5.5 3-Φ 3.4 9.5~10 14 0.1 18 4以上 18 1.5 60
CDC-S040CB 40 56 50 15 27 6.5 3-Φ 3.4 9.5~10.4 14.5 0.1 18 4以上 19 1.5 30
CDC-S050CB 50 71 65 22 37 8 3-Φ 4.3 14~14.4 19 0.1 25 4以上 25 3 30

 

Performance Parameter

Model Base No. Static
Torque
(N.m)
Static Torque(20℃) Insulation
Class
Max.
speed
(r/min)
Moment of
inertia
(g.cm²)
Max. Single
braking
power(J)
Total
braking
power(J)
Engage
time
(ms)
Release
time
(ms)
Weight
(kg)
Overexcitation output Usually excitation output
Voltage
(V)
Power
(W)
Current
(A)
Resistance
(Ω)
Voltage
(V)
Power
(W)
Current
(A)
Resistance
(Ω)
               
CDC-S017CB 17 0.06 24 16 0.67 36 7 1.36 0.19 36 F 6000 3.34x10⁻⁸ 5 1000 20 20 0.03
CDC-S020CB 20 0.14 24 16 0.67 36 7 1.36 0.19 36 F 6000 5.56x10⁻⁸ 15 3000 35 20 0.06
CDC-S025CB 25 0.32 24 16 0.67 36 7 1.36 0.19 36 F 6000 1.56x10⁻⁷ 15 3000 35 20 0.08
CDC-S032CB 32 0.62 24 16 0.67 36 7 1.36 0.19 36 F 6000 4.83x10⁻⁷ 87 17400 50 20 0.12
CDC-S040CB 40 1.32 24 26 1.09 22.1 7 2.2 0.32 22.1 F 6000 6.32x10⁻⁷ 87 17400 60 20 0.16
CDC-S050CB 50 3.2 24 16.5 0.69 35 7 1.4 0.2 35 F 6000 1.51x10⁻⁵ 200 40000 60 20 0.4

 

Points for Attention ofOperation.

Please be attention, do not knock, drop or exert too much force on E/M brake in amounting, because most ofparts are using flexible materials, otherwise, the brake may have scratch or deform which may affect the normal application and performance.

Wire leader

Do not pull the wire leader with big force, bend or lift outgoing line of brake, it could damage the outgoing lineand affect the normal working of brake.

Contactface

Our brake is designed of dry friction plate of two faces, any oil or water on friction plate will cause thedecreasing of brake torque, so please use protection cover in dry condition to prevent oil, water and dust from outside.

 

Points for Attention ofUsage.

Environment

The contact face must be protected from oil, water and dust etc.

Temperature of using environment

The temperature of using environment: 10°C~40°C, if it exceeds the range, must consult our engineer.

Change of power and voltage

The extreme change of power and voltage may not meet the requirement of brakes, so please control the voltage within +10% of the rated voltage.

 

Pointsfor Attention of Installation

The fixture of rotor and hubs.

The rotor and hub cannot be contacted to stator during design and using, if the fixing way is to use standard hexagon screw and thread fastening glue, please be sure the glue cannot exude on surface of hub.

Installation of screw

The screws to assembly to brakes needed to be loosen by using thread fastening glue.

Shaft

Thetoleranceof brake’hole is H7, if you apply pressing rotors or hubs, pressing tolerance should be considered.

Precision of contact face of brake

The concentricity of Brake' s assembly rabbet and shaft (X), and straightness of brake' s assembly face and shaft, should not exceed the allowed data in below table.

Size Dimension Concentricity (X) Straightness (Y)
CDC-S017CB 017 0.05 0.02
CDC-S020CB 020 0.05 0.02
CDC-S025CB 025 0.05 0.02
CDC-S032CB 032 0.05 0.02
CDC-S040CB 040 0.1 0.02
CDC-S050CB 050 0.1 0.02
Technical Details

Keyword: CDC-CB series

Prev: CDC-W series

Next: CDC-S series

Related Products

CDC-YC is a special powerful permanent magnet brake with a frictionally engaged, backlash-freeeffect.

Read More →

Spring-applied brakes for IEC motors Cast Iron Yoke Torque Range: 3Nm--1350Nm

Read More →

Spring-applied brakes for IEC motors Torque Range: 3Nm--600Nm

Read More →

Spring-applied brakes for D-wheel Forklift Trucks Torque Range: 6Nm--60Nm

Read More →

Spring-applied brakes for geared micro-motors Torque Range: 0.25Nm--2Nm

Read More →

Spring-applied brakes for small and ultra-thin motors Torque Range: 0.06Nm--3.2Nm

Read More →

Spring-applied brakes for servo-motors Torque Range: 0.38Nm--450Nm

Read More →

Product Inquiry

Please be sure to fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible

%{tishi_zhanwei}%