- Home
- ABOUT US
-
PRODUCTS
- Spring-applied Brakes
- Permanent Magnet Brakes
- Electromagnetic brakes for micro-motors
- Electromagnetic brakes for electric forklifts
- Permanent magnet brake
- CDC-ZT series spring pressurized electromagnetic brake
- Power-on brake
- Brakes for clean equipment and new energy vehicles
- Couplings
- Timing belt pulley
- Keyless locking device
- CDC wheel
- High-precision parts and OEM parts
- Robot electric jaw clamp
- News & Events
- Download
- CONTACT
CDC-C series
Category: 待上架
Summary Description
Spring-applied brakes for D-wheel Forklift Trucks Torque Range: 6Nm--60Nm
CDC-C Brake is a type of Spring-applied Electromagnetic Brake, which is specially developed for middle andsmall motors used on driving wheel of electric forklift, installed together with driving wheel assembly. It brake theshaft of driving wheel to achieve the stopping and emergency braking, which makes end users more easily, more secure and higher efficiency.
Characteristics
● Decelerating brake
● Low noise,small braking voice
● Design of large angle
Large angle design makes operation more flexible
● Large torque offer by small body
torque scope6-16(N.m)
● Long life time
Durable by usingimported highly-wearable friction plate;
● Meet high temperature conditions
Brake working temperatureis-10~+40(°C)
● Enclosing design improves the protection class.
Performance Parameter
| Model | Base No. | Torque (N.m) |
Coil (20℃) | Insulation class | Max Rotation speed (r/min) |
Engaing time (ms) |
Releasesing time (ms) |
|||
|---|---|---|---|---|---|---|---|---|---|---|
| Voltage DC(V) |
Powe (W) |
Currency (A) |
Resistance (Ω) |
|||||||
| CDC-C06 | 06 | 6 | 24 | 21 | 0.87 | 27.4 | F | 2500 | 60 | 30 |
| CDC-C08 | 08 | 8 | 24 | 34 | 1.42 | 16.9 | F | 2500 | 80 | 40 |
| CDC-C10 | 10 | 16 | 24 | 30 | 1.25 | 19.2 | F | 2500 | 80 | 40 |
| CDC-C12 | 12 | 32 | 24 | 40 | 1.66 | 14.4 | F | 2000 | 110 | 60 |
| CDC-C14 | 14 | 60 | 24 | 55 | 2.28 | 10.5 | F | 2000 | 190 | 80 |
Note: both the engaging time and releasing time are measured when controlled at DC side.
Dimension and Diagram

| Base No. | A | B | L | V | K | a | T | H | d |
|---|---|---|---|---|---|---|---|---|---|
| 06 | 84 | 72 | 18 | 3-M4 | 36.45 | 0.25 | 5 | 17.3 | 15 |
| 08 | 102 | 90 | 20 | 3-M5 | 43.75 | 0.25 | 5 | 16.3 | 14 |
| 10 | 130 | 112 | 20 | 3-M6 | 50.35 | 0.3 | 6 | 22.8 | 20 |
| 12 | 150 | 132 | 25 | 3-M6 | 56.4 | 0.3 | 6 | 22.8 | 20 |
| 14 | 165 | 145 | 30 | 3-M6 | 69.5 | 0.35 | 8 | 28.3 | 25 |
Note: detailed dimension please refer to detailed drawings of each size.
Points for Attention ofUsage
● Do not knock, drop or exert too much force on E/M brake in amounting, because most of parts are usingflexible materials, otherwise, the brake may have scratch or deform which may affect the normal application.
● Do not pull with big force, bend or lift outgoing line of brake, it could damage the outgoing line and affect thenormal working of brake.
● Our brake is designed with dry friction plate of two faces, any oil or water on friction plate will cause thedecreasing of brake torque, please use protection cover in dry condition to prevent oil, water and dust fromoutside.
● Excessive voltage fluctuation may have adverse impact on brakes, so please control the voltage within 10% of normal voltage, and smooth and no interference.
● The working gap is already adjusted well before shipment, please do not open it for readjustment, otherwisethe brake may not work as normal because of inappropriate gap.
● Specially reminding: the brake must be open when motor rotate, not allowed to drive by force, which may damage the brake in short time.
● The assembly screw is fixed by using appointed glue, it must be very careful not put glue on surface of rotor and square wheel.
● It may cause noise in working process due to not good installation precision of brake, please control within follow table;

| Allowable Value | Base No. | ||||
|---|---|---|---|---|---|
| 0.6 | 0.8 | 10 | 12 | 14 | |
| T | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 |
| Z | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 |
Keyword: CDC-C series
Prev: CDC-Z series
Next: CDC-W series
Related Products
CDC-YC series
CDC-ZT series
CDC-CB series
Please be sure to fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible