Key features

●CDC-ZT series spring pressurized electromagnetic brake, is a friction structure dry electromagnetic brake released after power off braking, this series of brakes have excellent and durable braking torque, a large number of applications: forklifts, lifting equipment, logistics and warehousing equipment, brake motors, geared motors, construction, packaging equipment, electric mopeds, electric roller shutters and various automation equipment.

●CDC-ZT series electromagnetic brakes, divided into two categories: one is -T type (ie: the braking torque of the brake can be adjusted by the adjustment ring and the transmission column); One is a normal brake (that is, the braking torque of the brake is not adjustable).

●CDC-ZT series electromagnetic brake achieves good F-class insulation withstand voltage, low working noise, wide applicable voltage range (42-460V), and large braking torque range: 3-1350N.m.

●CDC-ZT series electromagnetic brake adopts imported brake pads, which have good friction coefficient, excellent wear resistance and moisture resistance, and meet ROHS and REACH requirements; The products have passed CE certification and China Bridge Gantry Lifting Machinery Product Quality Supervision and Inspection Center brake type test certification.

●CDC-ZT series electromagnetic brake, can be equipped with manual release handle and protective sleeve according to the needs of use, convenient installation and simple maintenance.

Product code and model description

performance parameters

CDC-ZT series non-adjustable torque brake size and diagram:

CDC-ZT series T-type adjustable torque brake size and diagram

Release handle mounting dimensions

Self-locking screw release installation size

brake mounting diagram

Installation considerations

1. Before installation, check and ensure that the installation plane is flat, flatness ≤ 0.05, roughness ≤ Ra3.2, shaft and installation end face perpendicularity ≤ 0.05, if the installation surface accuracy is poor, it will cause noise when the brake is running.

2. During the installation process, it should be avoided to knock, drop or use too much force to cause the brake to deform, affecting its use.

3. During installation and use, the friction surface should be avoided with oil, water and other liquid substances, which will lead to the failure of the brake torque slide, in order to prevent the entry of oil, water and dust, a protective cover can be used for protection.

4. Large voltage fluctuations will affect the normal use of the brake, and the input voltage of the brake should be controlled within ±10% of the rated voltage.

5. When installing, the installation screw must be coated with thread fastening glue to prevent it from loosening, pay attention to the glue can not be adhered to the rotor, shaft sleeve and suction surface, which will cause the brake to not open normally.

6. Special attention should be paid to whether the brake is opened when the motor rotates, and the forced operation of the brake will cause damage to the brake.